All in One PU Foam up to 45 Liters High Filling Capacity with %180

Basic Info.

Product Description

Product Description

GNS A15 WOODEN & DOORS PU FOAM

1. Good adhesion to a wide variety of surfaces such as UPVC, masonry, brick, block work, glass, steel, aluminum, timber and other substrates (except PP, PE and Teflon);
2. Very good filling capacities;
3. Application temperature is between + 5ºC to +35ºC;
4. Optimal application temperature is between +18ºC to +30ºC;
5. It contains CFC-free propellants which are harmless to the ozone layer

1. Installing, fixing and insulating of door and window frames;
2. Filling and sealing of gaps, joint, openings and cavities;
3. Connecting of insulation materials and roof construction;
4. Bonding and mounting;
5. Insulating the electrical outlets and water pipes;
6. Heat preservation, cold and sound insulation;
7. Packaging purpose, wrap the precious & fragile commodity, shake-proof and anti-pressure

1. Shake the aerosol can for at least 40 seconds;
2. Clean and moisten surfaces with a water sprayer prior to application;
3. Fit the gun or plastic applicator on the adapter.
4. Firmly screw the can on the adapter and turn the flow adjustment screw; Fill the holes and cavities.
5. Bottom up during application; Foam will be tack-free in about 10 minutes; Excess can be trimmed in about one hour;
6. Fresh foam can be removed by using GNS Foam cleaner . Cured foam can only be removed mechanically.

Shelf life

1. Do not breathe spray/vapor; In case of eye contact, flush with water and get immediate medical attention;
2. Use in well-ventilated areas;
3. Wear suitable protective clothing, gloves and goggles;
4. Keep away from direct sunlight and do not expose temperatures over 50ºC;
5. Do not burn or pierce even after use;
6. Keep away from heat, sparks, flames and static electricity; Turn off sources of ignition (pilot light etc.);
7. Keep out of the reach of children.